Custom Retractable Banner Stand – Silver Aluminum Roll-Up
From $29.00
Set up a crisp trade show or storefront display in under 30 seconds. Our retractable banner stand uses a silver anodized aluminum cassette with dual swivel feet, a 3-section support pole and a padded carry bag.
- Two silver aluminum bases: Weighted Silver for events and retail, Premium Heavy Silver for frequent travel.
- Three print films: matte PP for indoor economy, 330gsm no-curl gray-back PET (best seller) or 450gsm heavy-duty gray-back PET.
- Factory direct: no minimum order, free digital proof, 2-day production, duties-paid DDP air delivery and a 3-day free remake for transit damage or print errors.
DDP air delivery to US, CA, UK, EU & AU only (7–12 business days) · 3-day free remake for transit damage or print errors.
Trade-Show Ready Silver Aluminum Retractable Banners
Built for frequent events, retail entrances and conferences. Every SignCrisp retractable stand ships with a reinforced silver aluminum cassette, dual swivel stabilizing feet, a snap-lock top rail and a padded black carry bag.
Specifications
| Component | Specification |
|---|---|
| Sizes | 24″ × 63″ (60 × 160 cm) · 31.5″ × 71″ (80 × 180 cm) · 31.5″ × 78.7″ (80 × 200 cm) |
| Base | Weighted Silver aluminum or Premium Heavy Silver aluminum |
| Print film | Matte PP (indoor economy) · 330gsm (0.26 mm) no-curl gray-back PET (best seller, fully opaque) · 450gsm heavy-duty gray-back PET |
| Included | Cassette base, 3-section pole, snap-lock top rail, padded carry bag (Full kit and Stand only) |
| Turnaround | 2 business days production + 7–12 business days duties-paid DDP air delivery |
Order more, save more
10% off 2–4 stands, 16% off 5–9 and 20% off 10 or more.
| Stand grade | Weighted Silver, Premium Heavy Silver |
|---|
Will the edges curl inward or show light through the back under trade show spotlights?
No—if you choose our 330gsm (0.26 mm) No-Curl Gray-Back PET Film (Best Seller) or 450gsm Heavy-Duty PET, the rigid stay-flat core resists edge curling and the 100% opaque gray backing blocks rear booth lighting. All finishes are matte anti-glare for crisp photography.
How do I avoid having my bottom logo or text cut off inside the base roller?
Roughly 6 in (15 cm) at the bottom attaches inside the spring roller and 0.5 in (1.2 cm) clamps into the top rail. Keep all logos, QR codes, and text above that bottom 6 in margin—and we review every file with a Free Digital Proof before printing.
Should I choose Weighted Silver or Premium Heavy Silver, and can I use it outdoors?
Both are engineered for indoor use (trade shows, hotel lobbies, retail entrances). Choose Weighted Silver with dual swivel feet for standard indoor booths and frequent travel; upgrade to Premium Heavy Silver for high-traffic lobbies or drafty doorways. For windy outdoor sidewalks, choose our Custom Feather Flags or Custom Vinyl Banners.
Can I replace just the printed banner later without buying a new stand?
Yes. Select Graphic Only (24×63, 31.5×71, or 31.5×78.7 in) to order a replacement print. When swapping graphics, fully extend the stand and insert the side locking pin (or keep firm tension) before detaching the old banner—never let the internal spring snap back uncontrolled.
How compact is it for travel, and how fast does it arrive?
Each stand retracts into its aluminum cassette and packs into the included padded black carry bag (≤ 34.6 in / 88 cm long), fitting easily in a car trunk or checked bag. Production takes 2 business days after proof approval, followed by 7–12 business days Free DDP air delivery with duties prepaid and a 3-Day Free Remake Warranty.
How do I set it up?
No tools needed. Lay the base flat and turn both swivel feet fully out, connect the support pole sections and stand the pole in the base, then lift the banner straight up by its top rail and hook the rail onto the top of the pole. To pack up, unhook the rail and guide the banner down slowly with both hands. Need help? Email hello@signcrisp.com and we will walk you through it.
What if the banner won't retract or rolls back too fast?
Lift the banner back up to its full height, pause for a second, then let it roll down slowly while you guide the top rail with both hands. It may take two or three tries for the roller to catch. Never open the base or adjust the spring yourself. If it still won't retract, send us a short video and we will make it right under our 3-Day Free Remake Warranty.
Will it stand straight, and does it need a flat floor?
Set it on a flat, level floor and turn both swivel feet fully out before raising the banner. Make sure every pole section is pushed fully together and the pole sits all the way down in the base. If your stand still leans, contact us with a photo.



















Reviews
There are no reviews yet.